COMPANY HEADER
Print Back
Spring-Fast® High Heat is made from our uncoated Spring-Fast® material and can withstand up to 1000 ºF (537 ºC) for use in high temperature areas where critical edge protection is necessary.
Spring-Fast® High Heat Wire Protection Flexible Grommets
Spring-Fast® High Heat Wire Protection Flexible Grommets - 2
Unit of Measure
Items Spring-Fast® High Heat Wire Protection Flexible Grommets
1052
Spring-Fast® High Heat AP Series Wire Protection Flexible Grommet 		Spring-Fast® High Heat FM Series Wire Protection Flexible Grommet
1053
Spring-Fast® High Heat FM Series Wire Protection Flexible Grommet
Description N/A Great gripping strength for severe shock and vibration environments. N/A Flush mounting profile on one side for smooth surface.
Series N/A AP N/A FM
Available Reel Length N/A 25 ft100 ft
Axis Conformity N/A Multi
Operating Temperature Range N/A -40 to 800 ºF-40 to 427 ºC
Maximum Operating Temperature1 N/A 1600 ºF870 ºC
Substrate Material N/A 304 Stainless Steel
Finish N/A #2 Finish
Flammability Certifications N/A FAR 25.853 UL94 V-0
Weldability2 N/A Weldable
Fabrication Options N/A Factory Pre-Cut Lengths Full Bypass Shears Roll-Fast™ Application Tool Spring-Fast® Cutter Cart
Product Size N/A 0 1 2 3 4 5 6 N/A 2 3 4
Sheet Thickness (T) for Product Size 0 N/A 0.020 to 0.030 in N/A
Sheet Thickness (T) for Product Size 1 N/A 0.029 to 0.045 in N/A
Sheet Thickness (T) for Product Size 2 N/A 0.044 to 0.056 in
Sheet Thickness (T) for Product Size 3 N/A 0.055 to 0.069 in
Sheet Thickness (T) for Product Size 4 N/A 0.068 to 0.090 in
Sheet Thickness (T) for Product Size 5 N/A 0.089 to 0.114 in N/A
Sheet Thickness (T) for Product Size 6 N/A 0.113 to 1.130 in N/A
Width (W) for Product Size 0 N/A 0.13 in N/A
Width (W) for Product Size 1 N/A 0.13 in N/A
Width (W) for Product Size 2 N/A 0.13 in N/A 0.14 in
Width (W) for Product Size 3 N/A 0.13 in N/A 0.14 in
Width (W) for Product Size 4 N/A 0.18 in N/A 0.14 in
Width (W) for Product Size 5 N/A 0.18 in N/A
Width (W) for Product Size 6 N/A 0.18 in N/A
Minimum Inside Radius N/A 0.125 in3.2 mm
Minimum Outside Radius N/A 0.25 in6.4 mm
Industry Standards/Certifications N/A RoHS compliant
Features and Benefits N/A
  • Conformal stainless steel grommet edging
  • Snap on multi-axial mounting, no adhesive necessary
  • Available on 25’ or 100’ foot reels or pre-cut lengths
  • Lowest profile on the market
Applications N/A
  • Heat Shields
  • Exhaust Systems
  • Engine Compartments
  • Gas and Oil Steam Boilers
  • Ovens
Note N/A The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.
  • 1 Above 800 ºF 304 Stainless Steel begins to precipitate out chromium carbides. This results in a decrease in corrosive resistance and ductility properties with time.
  • 2 Recommendations: LASER Weld; if filler is required use 308 Stainless Steel.