COMPANY HEADER
Request Information
Flush mounting profile on one side for smooth surface.
Unit of Measure

Qualifications

Series

 N/A FM

Available Reel Length

 N/A 25 ft100 ft

Axis Conformity

 N/A Multi

Operating Temperature Range

 N/A -40 to 800 ºF-40 to 427 ºC
Maximum Operating Temperature1 N/A 1600 ºF870 ºC

Substrate Material

 N/A 304 Stainless Steel

Finish

 N/A #2 Finish

Flammability Certifications

 N/A FAR 25.853 UL94 V-0
Weldability2 N/A Weldable

Fabrication Options

 N/A Factory Pre-Cut Lengths Full Bypass Shears Roll-Fast™ Application Tool Spring-Fast® Cutter Cart

Sizes

Product Size

 N/A 2 3 4

Sheet Thickness (T) for Product Size 2

 N/A 0.044 to 0.056 in

Sheet Thickness (T) for Product Size 3

 N/A 0.055 to 0.069 in

Sheet Thickness (T) for Product Size 4

 N/A 0.068 to 0.090 in

Width (W) for Product Size 2

 N/A 0.14 in

Width (W) for Product Size 3

 N/A 0.14 in

Width (W) for Product Size 4

 N/A 0.14 in

Conformal Stainless Steel Grommet Edging

Minimum Inside Radius

 N/A 0.125 in3.2 mm

Minimum Outside Radius

 N/A 0.25 in6.4 mm

Specifications

Industry Standards/Certifications

 N/A RoHS compliant

Features and Benefits

N/A

  • Conformal stainless steel grommet edging
  • Snap on multi-axial mounting, no adhesive necessary
  • Available on 25’ or 100’ foot reels or pre-cut lengths
  • Lowest profile on the market

Applications

N/A

  • Heat Shields
  • Exhaust Systems
  • Engine Compartments
  • Gas and Oil Steam Boilers
  • Ovens

Note

N/A The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.

  • 1 Above 800 ºF 304 Stainless Steel begins to precipitate out chromium carbides. This results in a decrease in corrosive resistance and ductility properties with time.
  • 2 Recommendations: LASER Weld; if filler is required use 308 Stainless Steel.