COMPANY HEADER
Request Information
Spring-Fast® is the fastest, safest, most reliable way to protect wires, cables, and tubing from abrasion. It locks on with finger pressure in seconds, eliminating solvents, adhesives, ancillary materials and volatile organic compound (VOCs). Spring-Fast® installs continuously and is very flexible for use on sharp corners and curved edges, such as flanged holes.
Unit of Measure

Specifications

Series

 N/A BAP Flexi-Grommet™

Axis Conformity

 N/A Multi

Substrate Material

 N/A Stainless Steel

Finish

 N/A TPE Cushion

Vicat Softening Point Color

 N/A Gray

Vicat Softening Point (ISO 306)

 N/A 230 ºF110 ºC

Test Standards for Vicat Softening Point (ISO 306)

 N/A ASTM D01525 Rate B

Operating Temperature Range

 N/A -40 to 185 ºF-40 to 85 ºC

Dielectric Withstanding Voltage at 60 Hz

 N/A 1500 V

Test Standards for Dielectric Withstanding at 60 Hz

 N/A NASM22529

Taber Abrasion Resistance

 N/A 25 mg Loss

Test Standards for Taber Abrasion Resistance

 N/A ASTM D1044 1 Kg Load, C17 Wheel at 1000 Cycles

Salt Spray

 N/A 2000 h

Test Standards for Salt Spray

 N/A ASTM B117 MIL-STD-202, Method 301

Immersion

 N/A No Physical Change

Test Standards for Immersion

 N/A NASM22529 Skydrol Compatible

Random Shock and Vibration

 N/A No Movement or Physical Change

Test Standards for Random Shock and Vibration

 N/A MIL-STD-1344, Method 2005.1 Test Condition VI, Letter J Duration 8 hours longitudinal and 8 hours perpendicular. rms G 41.7

Flammability

 N/A No Sustained Flame Front or Drips

Flammability Certifications

 N/A FAR 25.601 FAR 25.853 MIL-STD-202F, Method 111A UL94 V-0 File No. E113553 NZMT2

Fabrication Options

 N/A Factory Pre-Cut Lengths or Private Branded Kits Full Bypass Shears Roll-Fast™ Application Tool Spring-Fast® Cutter Cart

Industry Standards/Certifications

 N/A AS9100 B NSAI Certified AS9100/ISO 9001:2008 Certified I.S. EN ISO 9001:2008 NSAI Certified ISO 9001:2008 Registration No. AS19.4480 RoHS and DFAR Compliant UL94 V-0 Compliant

Sizes

Product Size

 N/A 0 1 2 3 4 5 6

Sheet Thickness (T) for Product Size 0

 N/A 0.020 to 0.030 in0.5 to 0.8 mm

Sheet Thickness (T) for Product Size 1

 N/A 0.029 to 0.045 in0.7 to 1.1 mm

Sheet Thickness (T) for Product Size 2

 N/A 0.044 to 0.056 in1.1 to 1.4 mm

Sheet Thickness (T) for Product Size 3

 N/A 0.055 to 0.069 in1.4 to 1.7 mm

Sheet Thickness (T) for Product Size 4

 N/A 0.069 to 0.090 in1.7 to 2.3 mm

Sheet Thickness (T) for Product Size 5

 N/A 0.089 to 0.113 in2.3 to 2.9 mm

Sheet Thickness (T) for Product Size 6

 N/A 0.113 to 0.130 in2.9 to 3.3 mm

Width (W) for Product Size 0 to 3

 N/A 0.19 in4.8 mm

Width (W) for Product Size 4 to 6

 N/A 0.28 in6.8 mm

Multi-Axis Flexibility

Minimum Inside Radius

 N/A 0.125 in3.2 mm

Minimum Outside Radius

 N/A 0.25 in6.4 mm

Features and Benefits

N/A

  • Multi-axis flexibility for flanged holes and inside and outside corners
  • Continuous edge protection
  • Excellent gripping strength
  • Excellent resistance to abrasion, shock and vibration, low and high temperatures, and corrosion
  • Fast assembly without the use of adhesives, rivets, or screws
  • Flammability per FAR 25.853
  • UL94 V-0 Compliant

Applications

N/A

  • Airframe Structure
  • Auxiliary Power Units
  • Avionic Instruments
  • Bulkheads
  • Cowling
  • Dashboard
  • Electrical Avionic Units
  • Electrical Power Center
  • In-flight Entertainment
  • Intercostal
  • Lightening Holes
  • Personal Safety Units
  • Seating
  • Tail Sections
  • Wing Ribs

Note

N/A Due to sheet thickness tolerances and finishes, end user should determine product sizes by trial. When sheet thickness is at the maximum for the grommet chosen, end user may use a rubber mallet to set, or try the next size larger grommet.

Certified Vendor to Fortune 100 & 500 OEMs, JIT with MAJOR OEMs Worldwide, supported by International Distribution.

The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.