COMPANY HEADER
Print Back
Plate Seals are the fastest, safest, and most reliable way to protect critical equipment in places where wire, cable, air hoses, liquid hoses, and fuel and oil lines pass through openings and are in contact with sharp panel surfaces. The flame resistant Plate Seal protects against chafing and abrasion, and seals out heat, fumes, dust, moisture, and other contaminants. The rubber grommet portion grips tightly to create an environmental seal that provides a clean and organized appearance. Plate Seal mounts to a panel using rivets or screws and is offered in stock sizes which can be customized to fit many applications.
Unit of Measure

Specifications

Continuous Operating Temperature

 N/A -50 to 320 ºF-45 to 160 ºC

Intermittent Operating Temperature

 N/A -70 to 400 ºF-57 to 204 ºC

Hole Diameters and Cutouts

 N/A 1 to 5 in25.4 to 127 mm

Hose Diameter

 N/A 0.25 to 1.5 in6.4 to 38.1 mm

Seal Type

 N/A A

Overall Diameter (OD)

 N/A 4.0 in101.6 mm

Overall Height (OH)

 N/A 0.10 in2.5 mm

Seal Inside Diameter (ID)

 N/A 1.0 in25.4 mm

Seal Outside Diameter (OD)

 N/A 3.0 in76.2 mm

Seal Height

 N/A 0.06 in1.5 mm

Mounting Hole Distance (MD)

 N/A 3.625 in92.1 mm

Industry Standards/Certifications

 N/A AS9100/ISO 9001:2008 ISO 9001:2008 Registration No. AS19.4480 RoHS compliant

Features and Benefits

N/A

  • Fast and easy to install with use of screw, rivets, or optional PSA
  • Encapsulated to keep unwanted contaminants from entering through hole or cutout area
  • Protects wire, cables, and hoses from chafing and abrasion
  • Enhances appearance
  • No need for extended cure time adhesives or other auxiliary material
  • Accepts a wide range of cable diameters
  • UV and ozone resistant
  • Excellent resistance to abrasion, compression set, flex cracking, impact, tear, and vibration

Applications

N/A

  • Aircraft galley equipment
  • Avionics
  • Bulkhead
  • Automotive
  • Railway
  • Telecommunications
  • Marine
  • Trailers and motor homes
  • General industrial

Performance

Performance

 N/A
  • Resistant to fluids (solvents, fuels, and oils) per MIL-R-3065D, MIL-R-6855, and MIL-R-2765
  • Flame retardant rubber also available.

Product Sizes Per Product Type

Product Sizes per Product Type

 N/A
  • For standard cable bundles or hose diameters from 0.25" to 1.5" (6.4 mm to 38.1 mm)
  • Choose seal inside diameter that is 1/16" to 1/8" (1.59 mm to 3.18 mm) smaller than bundle/hose diameter.
  • Largest bundle/hose diameter should be at

Note

N/A "BL" = Blank
The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.