COMPANY HEADER
Request Information
DTi offers an extremely broad range of metal foil based conductive adhesive tapes. The SMT Series Metal Foil Tapes are produced using highly conductive adhesives laminated onto thin copper or aluminum sheets offering cost-effective, low-profile mechanical, electrical, and adhesive properties. These characteristics provide a thin, lightweight, and flexible shielding design.

Available in roll, sheet or custom die-cut forms.
Unit of Measure

Specifications

Thickness

 N/A 0.0028 in0.070 mm

Width

 N/A 39.37 in1000 mm

Length

 N/A 164 ft50 m

Contact Resistivity

 N/A ≤0.10 ohm/square

Adhesive Strength per 25 mm

 N/A ≥800 gf

Service Temperature

 N/A 60 to 100 ºF15 to 38 ºC

Material for First Class Protection

 N/A Aluminum Copper

Properties

 N/A Adhesive Cost-Effective Electrical Low-Profile Mechanical

Characteristics

 N/A Flexible Shielding Design. Lightweight Thin

Industry Standards/Certifications

 N/A AS9100 B NSAI Certified ISO 9001:2008 NSAI RoHS compliant

Features and Benefits

N/A

  • Highly flexible
  • High conductivity
  • Excellent shielding effectiveness
  • Copper or aluminum foils
  • Corrosion resistant
  • Single or double sided construction

Applications

N/A

  • Wire harnesses
  • Grounding
  • Sealing seams

Application Techniques

N/A

  • Bonding surfaces must be clean and dry. Isopropyl alcohol is recommended as a cleaning agent.
  • Bond strength can be increased by applying ST Series PSA firmly with a roller or finger pressure to exclude air entrapment.
  • Adhesion is optimized when the substrates are flat or conformable.
  • Adhesion strength increases with 24-hour cure cycle due to increased wetting by the tape.
  • Enhanced electrical performance with ST Series PSA by lightly roughing the metal surface.
  • ST Series PSA should be applied between 60 ºF - 100 ºF(15 ºC - 38 ºC). Tape application below 50 ºF (10 ºC) is not recommended.
  • Warming the substrates to 100 ºF (38 ºC) facilitates adhesion. Once properly applied, low temperature holding power is generally satisfactory.

Note

N/A Custom layer configurations available. Contact Customer Service for information and free samples.

Certified Vendor to Fortune 100 & 500 OEMs, JIT with MAJOR OEMs Worldwide, supported by International Distribution

The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.