COMPANY HEADER
Request Information
A better, cleaner, and faster way to protect your equipment from environmental conditions; dust, low and high temperatures, and moisture.

Seal-Fast™ D Series Edge Seals are available in a variety of materials, which include a flexible steel or stainless steel substrate, FST Silicone, UL50E EPDM, or PVC gasket and seal assembly allowing for fast and easy assembly.

Options: Precut lengths and vulcanized corners.
Unit of Measure

Specifications

Substrate

N/A Steel

Gasket Material

 N/A EPDM

Seal Material

 N/A EPDM

Seal Configuration

 N/A Top

Profile

 N/A A

Application Thickness

 N/A 0.040 to 0.125 in

Grommet Width

 N/A 0.394 in

Grommet Height

 N/A 0.532 in

Overall Width

 N/A 0.72 in

Overall Height

 N/A 1.292 in

Seal Radius

 N/A 0.36 in

Seal Width

 N/A 0.72 in

Industry Standards/Certifications

 N/A AS9100/ISO 9001:2008 Certified ISO 9001:2008 Registration No. AS19.4480 RoHS compliant

Seal-Fast™ Enclosure and Door Seal Qualifications

Substrate (Base Material)

 N/A Steel Wire

Substrate (Optional Base Material)

 N/A Stainless Steel Wire

Gasket Material Hardness

 N/A Shore A 70 duro

Optional Gasket Material Hardness

 N/A Shore A 50 duro

Gasket Color

 N/A Black

Seal Material Hardness (Top or Side bulb)

 N/A Sponge

Seal Color

 N/A Black

Continuous Operating Temperature Range

 N/A -40 to 250 ºF-40 to 121 ºC

Interior Weatherometer

 N/A SAE J1885

Exterior Weatherometer

 N/A SAE J1960

Low Temperature Flexibility

 N/A SAE J200 M8BA 708 B13 Z1-6

Automotive Flammability of Interior Materials (Burn Resistance)

 N/A FMVSS 302

Fabrication Options

 N/A Bulk Factory Pre-Cut Lengths Private Branded Kits

Compression and Recompression

 N/A 50E UL 50

Flame, Smoke, Toxicity Approved for Fast Track AERO Protection

FST Seal-Fast™ Edge Seals

 N/A High Performance Silicone

Protects against extreme heat and cold.

Bulb compresses to prevent damage from environment and wear and tear.

Specifically suited for access, dash close out and tank hatch doors.

Doors, Windows & Cabin

Material for First Class Protection

 N/A Silicon TPE

Body/Interior (Silicon Material) for First Class Protection

 N/A Cabinets Doors Windows

Body/Interior (TPE Material) for First Class Protection

 N/A Bulkhead Flooring Seating

High Temperature for First Class Protection

 N/A Engine Compartment

Description (Silicon Material) for First Class Protection

 N/A Flame Propagation

Description (TPE Material) for First Class Protection

 N/A Toxicity

Standard Test Method (Silicon Material) for First Class Protection

 N/A ASTM C 1166 ASTM C 542

Standard Test Method (TPE Material) for First Class Protection

 N/A ASTM 66Z ATS 100/ABD 0031 BSS 7329

Coating Options for First Class Protection

 N/A Flocking Low Friction

Manufacturing Options for First Class Protection

 N/A Color Matching Cut to Length Extruding Molding Vulcanizing Ends

"D" Silicone Series

N/A

  • FDA approved (White Silicone Material)
  • Flame, Smoke and Toxicity compliant
  • ASTM E 662 (Smoke Density)
  • ASTM C 542 & ASTM C 1166 (Flame Propagation)
  • BSS 7293 (Toxicity)

"D" EPDM Series

N/A

  • FMVSS 302 (Flammability of Interior Materials)
  • SAE J1885 (Interior Weatherometer)
  • SAE J1960 (Exterior Weatherometer)
  • SAE 200 M8BA 708 B13 21-6 (Low Temperature Flexibility)
  • UL 50E Compliant, File Number JMST2.MH6035

"D" PVC/EPDM Series

N/A

  • Greater flexibility for small corner radii
  • Smaller profile

Features and Benefits

N/A

  • Excellent grip strength
  • Excellent resistance to abrasion, water absorption, and low and high temperatures
  • Indoor or outdoor use
  • Fast assembly without the use of adhesives, rivets, or screws
  • Multi-axis flexibility for small inside and outside radius corners

Applications

N/A

  • Automotive
  • Railway
  • Aerospace
  • Food service (FDA white)
  • Telecommunication
  • Construction, mining, and forestry
  • General industrial

Note

N/A Ask about our custom solutions and finite element analysis (FEA) capabilities.

Additional and custom sizes & profiles available.

The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.