Device Technologies, Inc. - Seal-Fast™ Protection Plate Seals

Unit of Measure

Items	PS-1.5-A-BL 1.5 Inch (in) Overall Diameter A Seal Type Seal-Fast™ Protection Plate Seal	PS-2.0-A-BL 2.0 Inch (in) Overall Diameter A Seal Type Seal-Fast™ Protection Plate Seal	PS-3.0-A-BL 3.0 Inch (in) Overall Diameter A Seal Type Seal-Fast™ Protection Plate Seal	PS-3.0-A-25 3.0 Inch (in) Overall Diameter A Seal Type Seal-Fast™ Protection Plate Seal	PS-3.0-A-38 3.0 Inch (in) Overall Diameter A Seal Type Seal-Fast™ Protection Plate Seal
Description	N/A Plate Seals are the fastest, safest, and most reliable way to protect critical equipment in places where wire, cable, air hoses, liquid hoses, and fuel and oil lines pass through openings and are in contact with sharp panel surfaces. The flame resistant Plate Seal protects against chafing and abrasion, and seals out heat, fumes, dust, moisture, and other contaminants. The rubber grommet portion grips tightly to create an environmental seal that provides a clean and organized appearance. Plate Seal mounts to a panel using rivets or screws and is offered in stock sizes which can be customized to fit many applications.
Continuous Operating Temperature	N/A -50 to 320 ºF-45 to 160 ºC
Intermittent Operating Temperature	N/A -70 to 400 ºF-57 to 204 ºC
Hole Diameters and Cutouts	N/A 1 to 5 in25.4 to 127 mm
Hose Diameter	N/A 0.25 to 1.5 in6.4 to 38.1 mm
Seal Type	N/A A
Overall Diameter (OD)	N/A 1.5 in38.1 mm	N/A 2.0 in50.8 mm	N/A 3.0 in76.2 mm	N/A 3.0 in76.2 mm	N/A 3.0 in76.2 mm
Overall Height (OH)	N/A 0.16 in4.1 mm
Seal Inside Diameter (ID)	N/A	N/A	N/A	N/A 0.25 in6.4 mm	N/A 0.375 in9.5 mm
Seal Outside Diameter (OD)	N/A 1.00 in25.4 mm	N/A 1.55 in39.4 mm	N/A 2.25 in57.2 mm	N/A 2.25 in57.2 mm	N/A 2.25 in57.2 mm
Seal Height	N/A 0.12 in3.0 mm
Mounting Hole Distance (MD)	N/A 1.25 in31.8 mm	N/A 1.75 in44.5 mm	N/A 2.625 in66.7 mm	N/A 2.625 in66.7 mm	N/A 2.625 in66.7 mm
Industry Standards/Certifications	N/A AS9100/ISO 9001:2008 ISO 9001:2008 Registration No. AS19.4480 RoHS compliant
Features and Benefits	N/A Fast and easy to install with use of screw, rivets, or optional PSA Encapsulated to keep unwanted contaminants from entering through hole or cutout area Protects wire, cables, and hoses from chafing and abrasion Enhances appearance No need for extended cure time adhesives or other auxiliary material Accepts a wide range of cable diameters UV and ozone resistant Excellent resistance to abrasion, compression set, flex cracking, impact, tear, and vibration
Applications	N/A Aircraft galley equipment Avionics Bulkhead Automotive Railway Telecommunications Marine Trailers and motor homes General industrial
Performance	N/A Resistant to fluids (solvents, fuels, and oils) per MIL-R-3065D, MIL-R-6855, and MIL-R-2765 Flame retardant rubber also available.
Product Sizes per Product Type	N/A For standard cable bundles or hose diameters from 0.25" to 1.5" (6.4 mm to 38.1 mm) Choose seal inside diameter that is 1/16" to 1/8" (1.59 mm to 3.18 mm) smaller than bundle/hose diameter. Largest bundle/hose diameter should be at
Note	N/A "BL" = Blank The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.