COMPANY HEADER
Mil-Spec qualified Spring-Fast® is the fastest, safest, most reliable way to protect wires, cables, and tubing from abrasion. It locks on with finger pressure in seconds, eliminating solvents, adhesives, ancillary materials and volatile organic compound (VOCs). Installs continuously and is very flexible for use on straight edges and sharp inside and outside corners.
Request Information
Unit of Measure
Items
Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommets

0.025 Inch (in) Sheet Thickness Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommet
Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommets

0.036 Inch (in) Sheet Thickness Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommet
Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommets

0.036 Inch (in) Sheet Thickness Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommet
Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommets

0.063 Inch (in) Sheet Thickness Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommet
Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommets

0.059 Inch (in) Sheet Thickness Spring-Fast® Mil-Spec M22529/2 Composite Flexible Grommet
Description N/A Mil-Spec qualified Spring-Fast is the fastest, safest, most reliable way to protect wires, cables, and tubing from abrasion. It locks on with finger pressure in seconds, eliminating solvents, adhesives, ancillary materials and volatile organic compound (VOCs). Installs continuously and is very flexible for use on straight edges and sharp inside and outside corners.
Temperature Range N/A -40 to 185 ºF-40 to 85 ºC
Voltage Breakdown at 60 Hz N/A 1500 V
Flammability Certifications N/A FAR 25.601 FAR 25.853 MIL-STD-202F Method 111A
Test Standards for Random Shock and Vibration N/A MIL-STD-1344 Method 2005.1 Test Condition VI, Letter J Overall rms G 41.24 N/A MIL-STD-1344 Method 2005.1 Test Condition VI, Letter J Overall rms G 41.25 N/A MIL-STD-1344 Method 2005.1 Test Condition VI, Letter J Overall rms G 41.26 N/A MIL-STD-1344 Method 2005.1 Test Condition VI, Letter J Overall rms G 41.27 N/A MIL-STD-1344 Method 2005.1 Test Condition VI, Letter J Overall rms G 41.28
Minimum Salt Spray Testing N/A 2000 h
Test Standards for Salt Spray Testing N/A MIL-STD-202F
MIL-STD Cross Reference N/A MS21266 - 1 (0.015 to 0.052 in.) N/A MS21266 - 1 (0.015 to 0.052 in.) N/A MS21266 - 2 (0.052 to 0.085 in.) N/A MS21266 - 2 (0.052 to 0.085 in.) N/A MS21266 - 2 (0.052 to 0.085 in.)
Sheet Thickness (A) N/A 0.025 in0.60 mm N/A 0.036 in0.90 mm N/A 0.036 in0.90 mm N/A 0.063 in1.60 mm N/A 0.059 in1.50 mm
Unit Length (L) N/A 25 ft7.6 m N/A 100 ft30.5 m N/A 25 ft7.6 m N/A 100 ft30.5 m N/A 25 ft7.6 m
Width (B) N/A 0.20 in5.10 mm
Nominal Hole Diameter Reference N/A 2.000 in2.250 in2.500 in2.750 in3.000 in3.250 in3.500 in3.750 in4.000 in4.250 in4.500 in4.750 in5.000 in5.250 in5.500 in5.750 in6.000 in
Length for 2.000 in. Nominal Hole Diameter Reference N/A 6.00 in
Length for 2.250 in. Nominal Hole Diameter Reference N/A 6.90 in
Length for 2.500 in. Nominal Hole Diameter Reference N/A 7.65 in
Length for 2.750 in. Nominal Hole Diameter Reference N/A 8.40 in
Length for 3.000 in. Nominal Hole Diameter Reference N/A 9.15 in
Length for 3.250 in. Nominal Hole Diameter Reference N/A 10.05 in
Length for 3.500 in. Nominal Hole Diameter Reference N/A 10.80 in
Length for 3.750 in. Nominal Hole Diameter Reference N/A 11.55 in
Length for 4.000 in. Nominal Hole Diameter Reference N/A 12.30 in
Length for 4.250 in. Nominal Hole Diameter Reference N/A 13.20 in
Length for 4.500 in. Nominal Hole Diameter Reference N/A 13.95 in
Length for 4.750 in. Nominal Hole Diameter Reference N/A 14.70 in
Length for 5.000 in. Nominal Hole Diameter Reference N/A 15.45 in
Length for 5.250 in. Nominal Hole Diameter Reference N/A 16.35 in
Length for 5.500 in. Nominal Hole Diameter Reference N/A 17.10 in
Length for 5.750 in. Nominal Hole Diameter Reference N/A 17.85 in
Length for 6.000 in. Nominal Hole Diameter Reference N/A 18.60 in
Number of Castles for 2.000 in. Nominal Hole Diameter Reference N/A 40
Number of Castles for 2.250 in. Nominal Hole Diameter Reference N/A 46
Number of Castles for 2.500 in. Nominal Hole Diameter Reference N/A 51
Number of Castles for 2.750 in. Nominal Hole Diameter Reference N/A 56
Number of Castles for 3.000 in. Nominal Hole Diameter Reference N/A 61
Number of Castles for 3.250 in. Nominal Hole Diameter Reference N/A 67
Number of Castles for 3.500 in. Nominal Hole Diameter Reference N/A 72
Number of Castles for 3.750 in. Nominal Hole Diameter Reference N/A 77
Number of Castles for 4.000 in. Nominal Hole Diameter Reference N/A 82
Number of Castles for 4.250 in. Nominal Hole Diameter Reference N/A 88
Number of Castles for 4.500 in. Nominal Hole Diameter Reference N/A 93
Number of Castles for 4.750 in. Nominal Hole Diameter Reference N/A 98
Number of Castles for 5.000 in. Nominal Hole Diameter Reference N/A 103
Number of Castles for 5.250 in. Nominal Hole Diameter Reference N/A 109
Number of Castles for 5.500 in. Nominal Hole Diameter Reference N/A 114
Number of Castles for 5.750 in. Nominal Hole Diameter Reference N/A 119
Number of Castles for 6.000 in. Nominal Hole Diameter Reference N/A 124
Test Standard for Cut Lengths N/A NASM22529
Industry Standards/Certifications N/A AS9100 B/ISO 9001:2008 Certified I.S. EN ISO 9001:2008 NSAI Certified Registration No. AS19.4480 RoHS compliant UL94 V-0 Compliant
Ordering Options N/A
  • 25' (7.6 m) or 100' (15 2 m)
  • Factory pre-cut lengths
  • Bulk or private branded kits
  • 840R Roll-Fast™ installation tool
  • MFE-100 Full Bypass Shears
  • 860GSB Spring-Fast® Cut to Length Scale
Features and Benefits N/A
  • NASM22529 Qualified
  • FAA Approved
  • Eliminates Adhesives
  • Eliminates Major Environmental and Safety Concerns
  • Adapts to a Wide Range of Material Thicknesses and Applications
  • For Straight Edges and Inside and Outside Corners\
  • NAVAIR Per 01-1A-505-1
  • FAR 25.853, Cage Code: 0HES0
  • National Stock Numbers Available
Applications N/A
  • Airframe Structure
  • Military Tactical Vehicles
  • Auxiliary Power Units
  • Avionic Instruments
  • In-flight Entertainment
  • Bulkheads
  • Seating
  • Dashboard
  • Lightening Holes
  • Tail Section
  • Radar Systems
  • Flight Refueling
  • Land and Armaments
  • Wing Ribs
Note N/A Due to sheet thickness tolerances and finishes, end user should determine product sizes by trial. When sheet thickness is at the maximum for the grommet chosen, end user may use a rubber mallet to set, or try the next size larger grommet.

Certified Vendor to Fortune 100 & 500 OEMs, JIT with MAJOR OEMs Worldwide, supported by International Distribution.

The information contained in this data sheet is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements, consult the factory. This publication is not to be taken as license to operate under, or a recommendation to infringe upon any existing patents. This supersedes and voids all previous literature, etc. Device Technologies, Inc. expressly disclaims any and all express or implied warranties concerning its products including without limitation, warranty of fitness for a particular purpose and warranty of merchantability.